Description
Handmade tire brand born in the Netherlands A.DUGAST / Dugast Dugast A.DUGAST / DUGAST
Founded in 1972 by André Dugas, the brand of handmade tires using the hand-sewn method is now produced in the Netherlands by Richard Nieuweis, who inherited the company name and technology.
The fact that top-class racers from all over the world use these tires shows the trust that the brand has earned.
The Pipisquallo is a tire especially suited for courses that require speed, such as grass, sand, and paved roads. The low side knobs provide good grip even on grass.
[SPEC]
| SIZE :. | 28" / 700c |
| Tire Width : 33mm | 33mm |
| WEIGHT : ave. 375g | ave. 375g |
| Air pressure : 1.3 ~ 5.5bar / 21 - 80PSI | 1.3 ~ 5.5bar / 21 - 80PSI |
| Casing : Cotton | Cotton |
| Tubeless Ready : Tubeless Ready | Tubeless Ready |
| Handmade in Netherlands |
Sold as a single unit
[How to Set Up A.DUGAST TLR Clincher]
This is a 100% cotton casing product. For cotton tires, use only ammonia-free sealant.
Before installation, make sure the rim is the correct size for the tire.
- Remove debris and old sealant from the inside of the rim.
- Use tubeless rim tape that is suitable for tubeless tires and for the air pressure indicated on the tire.
- Insert the tubeless valve until the rubber base rests firmly and evenly on the rim tape.
- After checking the direction of wheel rotation, install the two beads on the rim, making sure all beads are seated on the bottom of the rim.
- Slowly inflate the tire. Up to a maximum of 1 bar. The beads do not need to snap onto the rim.
Remove the valve core using the valve tool. Inject the appropriate amount of sealant. - Slowly inflate the tire to a maximum of 1 bar. Carefully push the tire inward where it is not in the correct position so that the sealant is spread over the entire tire between the bead and the rim. Do not inflate beyond 1 bar.
- If the tire is fully seated, slowly inflate to 1.5 bar. Rotate the wheel in all directions to ensure an even application of sealant. Do not allow the wheel to bounce and leave it alone.
The above setup should be done at least 12 hours prior to use.
[Maintenance].
Store in a dry place at room temperature, away from light.
After each ride, be sure to remove all particles from the tread that could damage the casing, such as pebbles, glass, metal, etc. Tires should be washed with fresh water.
Even if the bike will not be used for an extended period of time, keep the tires slightly inflated to prevent valve loss.
Rotate the wheels occasionally to ensure that the sealant is evenly distributed throughout the tire.
- Orders are shipped within 1–2 business days after payment is confirmed. Orders placed by 10:00 AM are generally shipped the same day.
- Messenger delivery is available within Nagoya City only (excluding complete bikes and framesets).
- We ship every day from Monday through Sunday, except on temporary closure days.
- Shipping destinations: throughout Japan and worldwide.
- Shipment may be delayed depending on credit card processing. If you would like to request a delivery date or time, please add a note in your cart.
- All orders are shipped from Circles.
- For damage or loss during transit, please contact the carrier.
Complete Bike Shipping within Japan
- A shipping fee of ¥9,900 (tax included) applies to complete bikes. Additional charges may apply for Okinawa and remote islands.
- After purchase, we perform a final inspection before shipping. Please allow 1–2 weeks in some cases.
- For packing, some parts may be removed. We strongly recommend having the bike reassembled and checked by your local bicycle shop before riding.
- We will contact you by email with delivery details.
- Products are also sold in-store, so availability may change before the order is finalized.
Frameset Shipping within Japan
- Flat-rate shipping within Japan: ¥5,500 (tax included). Additional charges may apply for Okinawa and remote islands.
- Shipping rates for OMNIUM framesets and complete bikes differ.
- We will contact you by email with delivery details.
- Facing and tapping preparation for framesets purchased from Circles is available at no additional charge. Details will be provided after purchase.
- Headset and bottom bracket installation are also available for an additional labor fee. Please contact us if required.
Custom & Stock Wheel Shipping within Japan
- A shipping fee of ¥2,000 (tax included) applies. Additional charges may apply for Okinawa and remote islands.
- Stock wheels undergo a final inspection by a mechanic before shipping. Please allow approximately 3 business days for dispatch.
For international orders, shipping costs vary by destination. Please check the amount shown at checkout.