A.DUGAST Pipistrello Clincher

A.DUGASTSKU: DA000442

Casing: Cotton
Size: 33mm / 28"

Description

Handmade tire brand born in the Netherlands A.DUGAST / Dugast Dugast A.DUGAST / DUGAST
Founded in 1972 by André Dugas, the brand of handmade tires using the hand-sewn method is now produced in the Netherlands by Richard Nieuweis, who inherited the company name and technology.
The fact that top-class racers from all over the world use these tires shows the trust that the brand has earned.

The Pipistrello is a tire that is especially suited for courses that require speed, such as grass, sand, and paved roads. The fine diamond pattern provides the same grip on sand as on grass.

[SPEC]

Size : 28" / 700c 28" / 700c
Tire Width : 33mm 33mm
WEIGHT : ave. 375g ave. 375g
Air pressure : 1.3 ~ 5.5bar / 21 - 80PSI 1.3 ~ 5.5bar / 21 - 80PSI
Casing : Cotton Cotton
Tubeless Ready : Tubeless Ready Tubeless Ready
Handmade in Netherlands

Sold as a single unit

[How to Set Up A.DUGAST TLR Clincher]

This is a 100% cotton casing product. For cotton tires, use only ammonia-free sealant.

Before installation, make sure the rim is the correct size for the tire.

  1. Remove debris and old sealant from the inside of the rim.

  2. Use tubeless rim tape that is suitable for tubeless tires and for the air pressure indicated on the tire.

  3. Insert the tubeless valve until the rubber base rests firmly and evenly on the rim tape.

  4. After checking the direction of wheel rotation, install the two beads on the rim, making sure all beads are seated on the bottom of the rim.

  5. Slowly inflate the tire. Up to a maximum of 1 bar. The beads do not need to snap onto the rim.
    Remove the valve core using the valve tool. Inject the appropriate amount of sealant.

  6. Slowly inflate the tire to a maximum of 1 bar. Carefully push the tire inward where it is not in the correct position so that the sealant is spread over the entire tire between the bead and the rim. Do not inflate beyond 1 bar.

  7. If the tire is fully seated, slowly inflate to 1.5 bar. Rotate the wheel in all directions to ensure an even application of sealant. Do not allow the wheel to bounce and leave it alone.

The above setup should be done at least 12 hours prior to use.

[Maintenance].

Store in a dry place at room temperature, away from light.
After each ride, be sure to remove all particles from the tread that could damage the casing, such as pebbles, glass, metal, etc. Tires should be washed with fresh water.

Even if the bike will not be used for an extended period of time, keep the tires slightly inflated to prevent valve loss.
Rotate the wheels occasionally to ensure that the sealant is evenly distributed throughout the tire.

  1. We ship within 1-2 business days after receiving your order (payment). (Basically, orders placed before 12:00 p.m. are shipped the same day.)
  2. Messenger delivery is available within Nagoya City only.
  3. We ship every day from Monday to Sunday, except on temporary holidays.
  4. Available delivery areas: All over Japan and the world.
  5. Please note that delivery may be delayed due to credit card processing status. If you would like to specify the delivery date and time, please fill in your request in the additional information in the shopping cart.
  6. The product will be shipped from Circles.
  7. Please contact the shipping company in case of damage or loss during shipping.

Regarding the delivery of complete bikes

  • Please note that a separate shipping fee of 9,900 yen (tax included) will be charged for shipping complete bikes. (However, an additional fee will be charged for delivery to Okinawa and remote islands.)
  • After receiving your order, we will do a final check and ship complete bikes, but it may take 1-2 weeks. Please understand.
  • We will send the bike with some parts removed for packing. We strongly recommend that you have your bicycle assembled at your nearest bicycle store.
  • We will inform you of the delivery date and other details by e-mail.
  • We apologize for any sales discrepancies at the store.

Regarding the delivery of frame sets

  • Nationwide flat-rate shipping: 5,500 yen (tax included) (However, an additional fee will be charged for delivery to Okinawa and remote islands.)
  • We will inform you of the delivery date and other details by e-mail.
  • We will provide the pre-treatment of facing and tapping for the frame sets purchased at our store as a service. We will inform you separately after purchase.
  • We can also install a headset and BB for a fee, so please feel free to contact us.

Recently viewed